Table of Contents
Advertisement
UPS5000-S-(35 kVA-210 kVA)
User Manual (Singapore, 35 kVA Power Modules)
Item
Stop bit
Figure 4-16 Modbus TCP settings
Item
ModbusTCP
encryption
Issue 02 (2020-01-10)
Description
communication, ensure that the
parity modes for the device nodes
are set to the same mode.
Stop bit in the Modbus
communication frame format.
When the UPS is connected over
the serial port Modbus, set this
parameter based on the frame
format that the upstream device
Modbus supports.
Description
If Modbus TCP is used for
communication, communication
links do not implement
encryption or implement
encryption based on the selected
encryption mode.
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
Default Value
Value Range
1
1–2
Default Value
Value Range
Enable
Disable, Enable
88
Advertisement
Table of Contents
