Advertisement
1. Pull the Lock Lever open about 70-80° to
the second engaging position, as shown in
Figure 4.
2. Insert the collared Chisel.
3. Slide the Clisel in as far as it will go.
4. Return the Lock Lever to its original position
to lock the Chisel in place. see figure 6.
GREASE AND OIL FILLING
Warning! Pull plug from power before any operations.
Demolition hammer mechanical part is easy to get worn and lose impact energy if
without enough lubrication, recommend filling grease and oil after 6 months usage. The
steps as follows:
Figure 4
figure 6
the shank. See Figure 3. Physically check that the
Chisel is secure before operating.
5. Physically check that the Chisel is secure
before
operating.
approximately 1-3/4'' of play, but should not
come out when pulled.
10
Figure 5
The
Chisel
will
have
Advertisement
