Table of Contents
Advertisement
8 •
750-405 [2 DI AC 230 V 10 ms, High-Side Switching]
Display Elements
Attention
An additional supply module must be added for the field supply with AC
230 V!
The supply voltage for the field side is made automatically through the
individual I/O modules by means of power jumper contacts.
Warning
The maximum current of the internal power jumper contacts is 10 A. When
configuring the system it is important not to exceed the maximum/sum
current. However, if such a case should occur, another supply module must be
added.
The digital input module 750-405 can be used with all couplers/controllers of
the WAGO-I/O-SYSTEM 750.
2.1.1.3
Display Elements
13 14
A
A
B
Fig. 2.1.1-2: Display
Elements
g040002x
LED
Channel
A
1
green
C
C
D
C
2
green
Designation
State Function
off
Input DI 1: Signal voltage (0)
Status
DI 1
on
Input DI 1: Signal voltage (1)
off
Input DI 2: Signal voltage (0)
Status
DI 2
on
Input DI 2: Signal voltage (1)
WAGO-I/O-SYSTEM 750
I/O Modules
Advertisement
Table of Contents
