General Safety Instruction; Safety Instruction; General Precaution; Precaution Regarding Battery Operation - TBB Energier Pro Series User Manual

1.General Safety Instruction

1.1 Safety Instruction

As dangerous voltages and high temperature exist within the Energier pro bi-directional inverter, only qualified and authorized maintenance
personnel are permitted to open and repair it..Please make sure Energier pro bi-directional inverter is turned off before open and repair it.
This manual contains information concerning the installation and operation of the Energier pro bi-directional inverter. All relevant parts of
the manual should be read prior to commencing the installation. Please follow the local stipulation meantime.
Any operation against safety requirement or against design, manufacture, safety standard, and are out of the manufacturer warranty.

1.2 General Precaution

1.2.1
Do not expose to dust, rain, snow or liquids of any type，it is designed for indoor use. DO NOT block off ventilation, otherwise
the Energier pro bi-directional inverter would be overheating.
1.2.2
To avoid fire and electric shock，make sure all cables selected with right gauge and being connected well. Smaller diameter
and broken cable are not allowed to use.
1.2.3
Please do not put any inflammable goods near to inverter.
1.2.4
Never place unit directly above batteries, gases from a battery will corrode and damage Energier pro bi-directional inverter.
1.2.5
Do not place battery over Energier pro bi-directional inverter.

1.3 Precaution regarding battery operation

1.3.1
Use plenty of fresh water to clean in case battery acid contacts skin, clothing, or eyes and consult with doctor as soon as possible.
1.3.2
he battery may generate flammable gas during charging. NEVER smoke or allow a spark or flame in vicinity of a battery.
T
1.3.3
Do not put the metal tool on the battery, spark and short circuit might lead to explosion.
1.3.4
REMOVE all personal metal items such as rings, bracelets, necklaces, and watches while working with batteries. Batteries can
cause short-circuit current high enough to make metal melt, and could cause severe burns.
1
Energier pro User Manual