Maintenance - EHEIM incpiria 200 marine Operating Instructions Manual

GB
4. Allow the water level to fall by approximately 2-5cm from the upper edge of the
safety outlet hose , and then interrupt the water flow enough using the tap  that
the water level remains constantly underneath the safety outlet .
D: Supporting surfaces
Sliding surfaces  and  must be kept clean to ensure a clean sliding movement of the glass
cover panes and to prevent damage.
D: Cover panels
Fit the cover panels to the sliding surfaces.
The cover panel that is shorter at the bottom runs on the lower tread of the rail and the longer
one on the upper tread.
E

Maintenance

Periodically free the safety vent in the inlet , the overflow (the overflow comb and the dual
shaft) from backlogs and remains such as algae, etc.
Always take care to ensure that the safety vent  in the inlet and the surrounding areas
are free from algae, etc.
This is the only way to guarantee overflow protection (i.e. to stop water flowing back into the
filter tank) in the case of a power cut.
Please remove salt deposits on the furniture, door hinges, reflectors, black cover panels and
supporting surfaces regularly with a soft and damp cloth.
Proceed particularly carefully with shiny surfaces (furniture, aquarium film and the lacquered
underside of the cover panels); there is a danger of micro-scratches.
If the water has a high level of limestone content then, as a precautionary measure, test the
pump rotor of the feed pump for free movement approximately every six months to a year
and, if necessary, descale the water.
F Fine adjustment of doors
If necessary, the doors can be readjusted as illustrated.
The doors can be quickly disassembled / assembled as illustrated using the quick release
function.
Guarantee
We provide a 24 month guarantee on aquarium lamps, valid from the date of purchase.
The guarantee covers all possible defects on integrated electronic parts (excl. fluorescent
tubes). Damage due to intervention by the user is not covered.
For the aquarium furniture we provide a 24 month guarantee for any defects in production.