Maintenance; Clearing Faults; Technical Data - EHEIM powerLED+ Series Operating Manual

English
3. Insert the LED light with the T5/T8 adapter
lamp socket via the end cap.
4. Screw down the end cap.

6. Maintenance

Attention! Electrocution!
Before maintenance work, remove the mains
plug of the power supply unit.
Caution Material damage.
Do not use hard objects or aggressive clean-
ing agents for cleaning.
The following sections describe maintenance
work necessary for optimum and fault-free
operation. Regular maintenance prolongs the
service life and secures functionality of the LED
light over a long period.
Cleaning the LED light
1. Clean the LED light as required.

7. Clearing faults

LED light does not illuminate
Possible cause
Mains plug of mains socket not connected
Remedy
Insert the mains plug in the mains socket
Possible cause
Plug of LED light not connected to power supply unit.
Remedy
Connect the plug to the socket of the power supply unit.
For other faults, please contact EHEIM Service.
8. Decommissioning
Disposal
When disposing of the appliance, heed the
respective statutory regulations.
The appliance may no longer be disposed of
with the municipal or household waste. The
appliance will be accepted free of charge at
municipal collection points or recycling centres.
The product packaging is made up of recyclable
materials. Dispose of them in an environmentally
responsible manner and take them for recycling.

9. Technical data

Technical Data, see page 107.
14
into the