Replacing The Emissions-Air Intake Filter; Fuel System Maintenance; Replacing The Fuel Filter - Toro TITAN HD 1500 Series Operator's Manual

Replacing the
Emissions-Air Intake Filter
Service Interval: Every 500 hours
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the filter from the vent hose.
4. Insert a new filter into the end of the vent hose.
Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you, others, and
can damage property.
• Perform any fuel-related maintenance
when the engine is cold. Do this outdoors
in an open area. Wipe up any fuel that
spills.
• Never smoke when draining fuel, and stay
away from an open flame or where a spark
may ignite the fuel fumes.

Replacing the Fuel Filter

Service Interval: Every 500 hours/Yearly (whichever
comes first) (more often in dusty,
dirty conditions).
Important:
Install the fuel line hoses and secure
with plastic ties the same as they were originally
installed at the factory to keep the fuel line away
from components that can cause fuel line damage.
The fuel filter is located near the engine on the left
front of the engine.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Allow the machine to cool down.
4. Close the fuel-shutoff valve under the seat
(Figure 81).
58