Adjusting The Height Of Cut - Toro TITAN HD 1500 Series Operator's Manual

Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion-control
levers rearward (Figure
Figure 33
33).
g008953

Adjusting the Height of Cut

Using the Transport Lock
The transport lock has 2 positions, and is used with
the deck-lift pedal. There is a L
an U position for the transport position of the
NLOCK
mower deck (Figure
Transport-Lock Positions
1. Transport lock knob
2. L position—The
OCK
mower deck locks into the
transport position.
31
position and
OCK
34).
Figure 34
3. U position—The
NLOCK
mower deck does not lock
into the transport position.
g037050