Servicing A Toro Engine - Toro TITAN HD 1500 Series Operator's Manual

Servicing a Toro Engine

This section is only for machines with Toro engines.
If your engine looks like 1 of the 2 engines shown in
Figure 68, you have a Toro engine.
Figure 68
1. Standard air cleaner
Servicing the Air Cleaner
Engines with a Standard Air Cleaner
Service Interval: Every 25 hours/Monthly (whichever
comes first)—For Toro engines with
a standard air cleaner—clean the
air-cleaner foam element (more
often in dusty, dirty conditions).
Every 100 hours/Yearly (whichever comes
first)—For Toro engines with a standard air
cleaner—replace the air-cleaner foam element
(more often in dusty, dirty conditions).
Every 100 hours/Yearly (whichever comes
first)—For Toro engines with a standard air
cleaner—service the air-cleaner paper element
(more often in dusty, dirty conditions).
Every 200 hours/Every 2 years (whichever
comes first)—For Toro engines with a standard
air cleaner—replace the air-cleaner paper
element (more often in dusty, dirty conditions).
Removing the Foam and Paper Elements
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Clean around the air-cleaner cover to prevent
dirt from getting into the engine and causing
damage.
4. Lift the cover and rotate the air-cleaner assembly
out of the engine
2. Heavy-duty air cleaner
(Figure 69).
g231404
5. Separate the foam and paper elements
70).
Servicing the Foam Element
1. Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
is torn or worn.
52
Figure 69
Figure 70
Replace the foam element if it
g027800
g027801
(Figure
g027802