Instrument Markings - Keysight Technologies X Series Getting Started Manual

Safety Information

Instrument Markings

Instrument Markings
The signal generator may have the following markings. Familiarize yourself
with each marking and its meaning before operating the signal generator.
ICES/NMB-001
Keysight CXG, EXG, and MXG X-Series Signal Generators Getting Started Guide
This symbol marks the standby position of the power line switch.
This symbol indicates that the input power required is AC.
This symbol indicates Frame or chassis Terminal.
The instruction documentation symbol. The product is marked with this
symbol when it is necessary for you to refer to instructions in the
documentation.
This symbol identifies the Protective Conductor Terminal.
The CE mark is a registered trademark of the European Community. If this
symbol is accompanied by a year, it is the year when the design was proven.
It indicates that the product complies with all relevant directives.
The Keysight email address is required by EU directives applicable to our
product.
The CSA mark is a registered trademark of the CSA International.
The RCM mark is a registered trademark of the Australian Communications
and Media Authority.
This is a combined marking to indicate product compliance with industry
Canadian Interference-Causing Equipment Standard (ICES-001).
This is also a symbol of an Industrial Scientific and Medical Group 1 Class A
product (CISPR 11, Clause 5).
This is a marking to indicate product compliance with the Industry Canadian
Interference-Causing Equipment Standard (ICES-001), Cet appareil ISM est
conforme a la norme NMB du Canada.
This is the symbol of an Industrial Scientific and Medical Group 1 Class A
Product. (CISPER 11, Clause 5)
This symbol indicates conformance to the standard specifications.
11