Related Manuals for Black Box EMERALD SE DUAL-HEAD
Summary of Contents for Black Box EMERALD SE DUAL-HEAD
- Page 1 STEP X - Name of Step QUICK START GUIDE EMD2002SE-T, EMD2002SE-R EMERALD SE DUAL-HEAD 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM...
- Page 2 STEP 1A - Transmitter Diagrams 4 5 6...
- Page 3 STEP 1B - Transmitter Components TABLE 1. EMD2002SE-T COMPONENTS NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION Power LED button Deactivated, not used 5 VDC Power In connector Connect to supplied power adapter Connect to PC/workstation USB USB Type B connector connector Speed LED Indicates 10/100/1000 Mbps...
- Page 4 STEP 2A - Receiver Diagrams...
- Page 5 STEP 2B - Receiver Components TABLE 2. EMD2002SE-R COMPONENTS NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION On/Off button Deactivated, not used (2) USB Type A connectors Connect to USB peripherals Microphone Connect to microphone Speakers Connect to speakers 5 VDC Power In connector Connect to supplied power adapter (2) USB Type A connectors Connect to USB peripherals...
-
Page 6: Step 3 - Connect Power
STEP 3 - Connect Power CONNECT POWER TO RECEIVER CONNECT POWER TO TRANSMITTER Locate the power supply adapter and the AC Locate the power supply adapter and the AC line cord. line cord. 2. Plug the DC connector of the power supply 2. -
Page 7: Default Settings
STEP 5 - Starting Up and Default Settings DEFAULT SETTINGS STARTING UP Default Settings: 1. Once everything is connected, press the Power button on the front of the Emerald SE Transmitter IP Address: 192.168.1.22 Receiver. Receiver IP Address: 192.168.1.21 2. The Graphical User Interface (GUI) will Type: Static appear on the screen. -
Page 8: Step 6 - Point-To-Point Installation
STEP 6 - Point-to-Point Installation POINT-TO-POINT INSTALLATION 1. Simply connect the transmitter to the receiver using a CATx cable (but do not power up the In a point-to-point configuration, no transmitter yet), then connect a keyboard, administrator setup of the Emerald SE monitor, and mouse to the remote unit (remote Transmitter or the Emerald SE receiver is unit is on at this time). -
Page 9: Getting Started
STEP 7 - Matrix Installation and Getting Started 5. Once the transmitter is configured, you can MATRIX INSTALLATION now configure the receiver. In a matrix installation, every Emerald SE 6. If the units are on different subnets, transmitter and receiver requires its own IP then routers will need to be used to properly address. - Page 10 STEP 8 - Download the User Manual (Optional) The full user manual/installation guides can be downloaded from the Black Box Web site. FOR US, AUSTRALIA NEW ZEALAND, AND FOR OTHER COUNTRIES CANADA 1. Go to BLACK-BOX.EU/SUPPORTCENTER 1. Go to BLACKBOX.COM 2.
- Page 11 NOTES...
- Page 12 STEP X - Name of Step Contact our free, 24/7 technical support in the US at 877-877-2269 or INFO@BLACKBOX.COM For other countries, go to BLACKBOX.COM/CONTACT-US COPYRIGHT 2018. BLACK BOX CORPORATION. ALL RIGHTS RESERVED. EMD2002SE_QSG_REV1.PDF...