Page 1
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com...
Page 2
We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.” You’ll be live with one of our technical experts in less than 30 seconds.
Page 3
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3.
Page 4
Trademarks Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Windows and Windows XP are registered trademarks of Microsoft Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Entering a Sequence of Commands on the Front Control Panel ....................17 Remote Control Operation ..............................18 Operation of the Application Software ...........................19 Operating the Unit through the RS-232 Connection....................... 20 Troubleshooting ....................................21 Contacting Black Box ................................21 Shipping and Packaging ................................21 Page 5 AVSW-DVI8x8...
7) Make sure all the cables are in good working condition; do not use cut or damaged cables. NOTE: The operating instructions given in this user‘s manual can be used with other DVI Matrix Switch models from Black Box; however, for any maintenance information, consult the user‘s guide for those specific products.
Two versions of the 8X8 DVI-D Matrix Switch are available: the AVSW-DVI8X8 Matrix Switch with full audio capabilities, and the VSW-DVI8X8 Matrix Switch without audio. 3.2 What‘s Included: • AVSW-DVI8X8 Matrix Switch with Audio or VSW-DVI8X8 Matrix Switch • CD with application software • Remote control unit •...
Chapter 3: Introduction 3.3 Front and Rear Views: Figure 3-1. Front of the Matrix Switch Figure 3-2. Back of the Matrix Switch 724-746-5500 | blackbox.com Page 10 AVSW-DVI8x8...
Chapter 4: Installation 4.0 Installation The 8X8 DVI-D Matrix Switch has a durable metal casing and can be stacked with other devices. It is also rackmountable and can be installed on a standard 19 inch rack. It is recommended to leave a 1U space between the units to allow easy access for cable installation.
Chapter 4: Installation 4.1 Connecting using Input and Output Terminals The 8X8 DVI-D Matrix Switch may receive signals from DVD players, computers, graphics workstations, and other digital non-HDCP signals. The switch can provide output to projectors, video recorders, displays, and other DVI non-HDCP displays, depending on the application.
Page 13
Chapter 4: Installation Figure 4-4. RS-232 DB9 connector. Table 4-2. Pinning for the RS-232 connector. Number Function Not used Not used Transmit Receive Not used Not used Ground Ground Not used Not used Not used Not used Not used Not used Not used Not used Page 13...
Chapter 4: Installation 4.2 Connecting and Setting up Audio (AVSW-DVI8X8 only) The 8X8 DVI-D Matrix Switch with Audio features two types of connections: balanced and unbalanced. The balanced connection transmits a pair of balanced signals along two cables. Because interference will have the same intensity and the opposite phases on the two cables, the two signals will balance each other.
The unit can be controlled one of four ways: • Using controls on the front panel • With the Remote Control unit that is provided with the Matrix Switch • Using a PC and Black Box‘s software controller. • Using the RS-232 control systems. 5.2 Front Control/Operation LCD display: Real-time operations and status monitor Table 5-1.
Page 16
Chapter 5: Operation and Control Table 5-1, continued. Controls for Operation of the Matrix Switch using the Front Panel buttons. Inquiring status button: To inquire about the present status. Example 1: To inquire the status of output channel 7. Operation: Press buttons in the following order “7”, “STATUS”. STATUS Example 2: To inquire the status of all the output channels one by one.
Chapter 5: Operation and Control 5.3 Entering a Sequence of Commands on the Front Control Panel Figure 5-1. Press the button for input channel number “1“. The LCD displays: ”1”. Figure 5-2. Press the button for switching mode “AV“. The LCD displays “B”. Figure 5-3.
Chapter 5: Operation and Control Figure 5-7. Press the ”Enter” button to execute this sequence of commands. The LCD displays, ”Switch OK“. Figure 5-8. Display feedback on LCD: The video signal of output channel 4 is transferred from the input channel 3 and the audio signal is from the input channel 2.
Chapter 5: Operation and Control 5.5 Operation of the Application Software Video Matrix Switching Software is a compatible application that can be used with this series of Matrix Switches. Requirements to run the software: • Operating system: Windows 98/2000/NT, Windows XP , Windows 7 ®...
Chapter 5: Operation and Control 5.6 Operating the Unit through the RS-232 Connection Table 5-2. Operating the Matrix Switch through an RS-232 Connection Command Types Command Codes Functions /*Type; Acquires the model‘s information. /+xxxxxxxx; Rewrites the passwords; must be eight digits. /%Lock Locks the keyboard /%Unlock...
• Package it carefully. We recommend that you use the original container. • If you are returning the unit, make sure you include everything you received with it. • Before you ship for return or repair, contact Black Box to get a Return Authorization (RA) number. Page 21...