Using Tg Setup To Set Parameters; Installation Instructions And Ethernet Setup - Tektronix TG8000 Technical Reference

Using TG Setup to set parameters

Installation instructions and Ethernet setup

Installing TG Setup
Creating a desktop
shortcut icon
TG8000 Multiformat Test Signal Generator PC Tools Technical Reference
TG Setup, a standard accessory with the TG8000, is a software application for
a PC using the Microsoft Windows operating system. TG Setup provides the
capability to set all of the parameters of the TG8000 mainframe and installed
modules using a PC.
This section provides the following information:
Installation instructions and Ethernet setup
Starting and exiting TG Setup
Elements of the TG Setup window
Using the TG Setup menus
TG Setup tutorial
This subsection contains instructions to install and configure the TG Setup
application on your PC.
The following installation instructions require that you are familiar with the basics
of using the Windows operating system.
Perform the following procedure to install TG Setup software:
1. Be sure that your PC meets the requirements before proceeding with the
installation. (See page viii, PC system requirements.)
2. Insert the TG700 and TG8000 SW Library and Documentation DVD
(063-4440-XX) into a DVD drive on your PC.
3. When the Product Software and Documentation Browser window appears,
select the TG7 Tools Software link.
4. Select the TG Setup link to install the software. Follow the on-screen
instructions to complete the software installation.
Perform the following procedure to create an icon on your PC desktop that you
can use to run the TG Setup application.
1. On your PC display, right click to open the desktop menu.
2. Use the New > Shortcut command to create a shortcut to the TGSetup.exe
file.
3. You can start the TG Setup application by double-clicking the shortcut icon.
1