Procedure; Creating And Setting Up A Difference Calculation; General - FLIR E53 User Manual

16 Working with measurement tools

16.6.2 Procedure

Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the navigation pad—or touch and hold the tool. This displays a context menu.
3. Use the navigation pad to select
4. Push the navigation pad. This displays a submenu.
5. Use the navigation pad to select one or more of the following:
• Select (Max) to display the maximum value.
• Select (Min) to display the minimum value.
• Select (Avg) to display the average value.
• Select (depending on the tool)
within the measurement tool
(Settings > Device settings > Lamp & laser > Enable lamp & laser). For more infor-
mation, see section 11.9 Measuring areas, page 35.
• Select (Max & min markers) to display the maximum and minimum markers
(the hot/cold spots).
6. Push the navigation pad to toggle the function between inactive and active:
• When the icon with the unfilled indicator
• When the icon with the filled indicator
7. When completed, push the navigation pad down to close the submenu.
8. Select (Done) and push the navigation pad.
16.7 Creating and setting up a difference
calculation

16.7.1 General

A difference calculation gives the difference between the values of two known measure-
ment results.
16.7.2 Procedure
Note
• You can set up a difference calculation when previewing an image or when editing an
image in the archive.
• Depending on the camera model, you can also set up a difference calculation when de-
fining user presets or by selecting the measurement tool Hot spot - Spot.
• This procedure assumes that you have previously laid out at least one measurement
tool on the screen.
7. The availability of this feature is dependent on the camera model.
#T810190; r. AL/47698/47698; en-US
(Max/Min/Avg).
or (Area) to display the area of an object
7 . Area measurements require that the laser is enabled
is displayed, the function is inactive.
is displayed, the function is active.
81