FLIR E53 User Manual page 121

25 Changing settings
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 11.20 Calibrating the compass, page
52.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an im-
age is saved.
◦ Disable all: This setting is used to disable the camera lamp, laser, and flash function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
Available choices are Off, 5 min, and 20 min.
• User interface options: This submenu includes the following settings:
◦ Manual adjustment using touch: This setting is used to enable/disable the touch
functionality for manual image adjustments. For more information, see section 14.3
Adjusting the infrared image, page 64.
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 14.3 Adjusting the infrared image, page 64.
◦ Emissivity mode: This setting specifies how the measurement parameter emissivity
will be entered. Available options are Select values and Select from materials table.
For more information, see section 14.6 Changing the measurement parameters,
page 69.
• Volume: The volume slider is used to control the volume of the built-in speaker.
• Reset options: This submenu includes the following settings:
◦ Reset default camera mode...: This setting will affect the image mode, color palette,
measurement tools, and measurement parameters. Saved images will not be
affected.
◦ Reset device settings to factory default...: This setting will affect all camera settings,
including regional settings. Saved images will not be affected. The camera will be re-
started and you will be prompted to set the regional settings.
◦ Reset image counter...: This setting will reset the numbering of the image filenames.
To prevent image files being overwritten, the new counter value will be based on the
highest existing filename number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more information.
You can choose to execute the reset action or to cancel.
• Camera information: This submenu displays information about the camera. No changes
can be made.
◦ Model.
◦ Serial number.
◦ Part number.
◦ Software: The version of the software.
◦ Storage: The used and free space on the memory card.
◦ Lens: The field of view of the lens.
◦ Calibrate lens... 13 : This will start the lens–camera calibration wizard. For more infor-
mation, see section 11.19 Calibrating the lens–camera combination, page 50.
◦ Battery: The remaining battery capacity (in percent).
◦ Register camera...: This will start the registration wizard. For more information, see
section 7 Register the camera, page 13.
13. This item is dependent on the camera model.
#T810190; r. AL/47698/47698; en-US
109