Print Centered - Canon TX-3000 Online Manual

Print centered

Prints the output object area in the center of the paper.
Select this setting item from Device settings > Print settings > HP-GL/2 print settings > Paper settings.
• OFF (Initial setting)
The output object area is not printed in the center of the paper.
• ON
◦ For cut sheet paper
Prints the output object area in the center of the paper.
◦ For roll paper
Prints the output object area in the horizontal center of the paper.
Note
• The output object area is not printed in the center when the paper size is smaller than the
output page size.
• Nesting cannot be performed while ON is selected.
PRINT CENTERED EXAMPLES
• OFF is selected when printing on sheet
• ON is selected when printing on sheet
• OFF is selected when printing on roll
238