Canon TX-3000 Online Manual page 556

Is the width of paper roll 1 different from the
Condi-
width of paper roll 2?
tion 7
*1 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is
selected.
• When the printer has switched to sleep mode and has returned to the initial position
• When the printer has been turned on
• When cut paper has been fed into the printer and has exited it
If the Detect paper setting mismatch setting is set on Display warning or Do not detect
Whether the paper roll loaded on the printer is
Condi-
long enough to print the paper size specified for
tion 1
the print job.
Whether the paper roll loaded on the printer
Condi-
matches the paper type specified for the print
tion 2
job.
In the Printer menu, how has the Roll paper
Condi-
auto switching setting changed?
tion 3
Condition
width of both paper roll 1 and pa-
per roll 2
Roll width is different
Roll width is the same
Situation
Only one of either paper roll 1 or
paper roll 2 is long enough
Neither paper roll 1 nor paper roll
2 are long enough
Both paper roll 1 and paper roll 2
are long enough
On the Printer's menu, Manage
remaining roll amount is set on
Disable (length of the paper roll
cannot be determined)
Only one of either paper roll 1 or
paper roll 2 matches the paper
type
Neither roll 1 nor roll 2 match the
paper type
Both paper roll 1 and paper roll 2
match the paper type
It has changed to Do not identify
size
556
Select the paper
roll whose width is
closer to the width
specified for the
print job
Select the paper
roll currently being
fed into the platen
*1
Judgment result
Select the paper
roll of sufficient
length
Error
To Condition 2
Select the paper
roll matching the
paper type
To Condition 3
Select the paper
roll currently being