Canon TX-3000 Online Manual page 204

Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).
■ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, and Windows 7.
■ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
■ Timeout setting
Specifies the timeout length.
◦ Bonjour settings
Setting items for LAN using Bonjour for macOS.
■ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
■ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ IEEE802.1X settings
Performs various settings for IEEE802.1.X.
◦ SNTP settings
Performs various settings for SNTP (Simple Network Time Protocol).
◦ Spanning tree setting
Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network.
◦ LPR protocol setting
Enables/Disables the LPR setting.
◦ RAW protocol
Enables/Disables RAW printing.
◦ LLMNR
Enables/Disables LLMNR (Link-Local Multicast Name Resolution). Selecting Active allows the
printer to detect printer's IP address from the printer name without a DNS server.
◦ Gigabit Ethernet settings
Specifies the communication speed and communication method when using Gigabit Ethernet.
◦ Use Dedicated Port
204