Mounting; Safety Notices For Installation - Siemens SIMATIC NET SCALANCE X-000 Series Operating Instructions Manual

Industrial ethernet switches
Table of Contents

Advertisement

Mounting

5.1

Safety notices for installation

Safety notices
When installing the device, keep to the safety notices listed below.
If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the
ambient temperature of the device.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
The device is intended for indoor use only.
The device may only be operated in an environment with pollution degree 1 or 2 (see
IEC 60664-1).
When used in hazardous environments corresponding to Class I, Division 2 or Class I, Zone
2, the device must be installed in a cabinet or a suitable enclosure.
Safety notices for use according to ATEX and IECEx
If you use the device under ATEX or IECEx conditions you must also keep to the following
safety notices in addition to the general safety notices for protection against explosion:
The equipment shall only be used in an area of not more than pollution degree 2, as defined
in EN/IEC 60664-1.
SCALANCE X-000
Operating Instructions, 12/2018, C79000-G8976-C344-03
WARNING
WARNING
WARNING
WARNING
WARNING
5
21

Advertisement

Table of Contents
loading

Table of Contents