Siemens SIMATIC NET SCALANCE X-000 Series Operating Instructions Manual page 49

Overvoltage resistance
The IE switches SCALANCE X005TS and SCALANCE X005EEC have passed advanced
overvoltage tests.
Power supply = 24 VDC
Overvoltage test with:
● 36 V/1s
● 100 V/1ms (with a source resistance of 10 ohms)
Mechanical stability (in operation)
Device
SCALANCE X005
SCALANCE X005TS
SCALANCE X005EEC
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual
support.industry.siemens.com/cs/ww/en/view/27069465)
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual
support.industry.siemens.com/cs/ww/en/view/84922825)
● "EMC Installation Guidelines" configuration manual
cs/ww/en/view/60612658)
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target
systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
SCALANCE X-000
Operating Instructions, 12/2018, C79000-G8976-C344-03
DIN EN 60068-2-6 oscillation
10 - 58.12 Hz: 0.075 mm
58.12 - 500 Hz: 10 m/s
10 cycles
WARNING
DIN EN 60068-2-27 shock
150 m/s
6 shocks per axis
2
●
●
●
(https://support.industry.siemens.com/
Approvals
, 11 ms duration
2
●
●
●
(https://
(https://
49