Activate - Deactivate Sp - Intec MGC2-12 User Manual

PolyGard Multi-Point Controller
®
User Manual - MGC2-12
3.6.1 Activate – Deactivate SP
Symbol Description
SP 01 Sensor point
Active SP Status
Polygard® is a registered trademark of MSR
Customer Services (858) 578-7887 & (888) GO INTEC
INTEC Controls, 12700 Stowe Dr., Suite 100, Poway, CA 92064
Delay OFF time
0 s
AV Mode
CV
Stage - 1 2 3 4 5
Fault - 1 1 0 0 0
S1; S2; S3; S4; S5;
01; 02; 03, 04; 05;
Analog Output
0
Setting
Function
Status
Selection SP No. (SP01 is the internal Transmitter)
not active
active not active = Sensor point disabled for reporting
Fax (858) 578-4633 & (888) FX INTEC
Set Delay OFF time
See 3.6.6
Define Control Mode
See 3.6.7
Assign a SP Fault to a Stage
See 3.6.8
Assign a relay to a Stage
See 3.6.9
Assign SP signal to an Analog Output
See 3.6.10
= Sensor point enabled for reporting
www.inteccontrols.com
Page 15
Specification subject to change without notice.
Printed in USA 131119
MGC2-12