Table of Contents
Advertisement
PolyGard
Multi-Point Controller
®
User Manual - MGC2-12
3
Menu Overview
The Multi-Point Controller MGC2 is operated via a simple and logical menu structure which is easy to learn. The
operating menu contains the following levels:
● Starting menu with date and time if no SP is registered, otherwise scrolling display of the gas concentrations
of all registered transmitters in 5-second intervals
● Main menu
● Submenu 1 and 2
Starting menu
Power On Time
Polygard® is a registered trademark of MSR
Customer Services (858) 578-7887 & (888) GO INTEC
INTEC Controls, 12700 Stowe Dr., Suite 100, Poway, CA 92064
Main menu
After 30 sec.
INTEC
10.23.13 12:53
System Errors
Stage Status
Relay Status
Sensor Readings
Relay Setup
SP Setup
Data Logger
System Setup
Fax (858) 578-4633 & (888) FX INTEC
www.inteccontrols.com
Page 07
Sub menu
or
Reading and reset of errors
See Section 3.1
Display of the status of actual alarms
See Section 3.2
Display of the relay status
Manual operation of the relays
Reset function of the relays
See Section 3.3
Display of the sensor values
See Section 3.4
Reading and change of the relay parameters
See Section 3.5
Reading and change of sensor point parameters
Activate or Deactivate SP
Assignment of the alarms to the alarm relay
See Section 3.6
Not applicable to standard MGC2 controllers;
available as a special order option
Reading and change of the system parameters
See Section 3.7
Specification subject to change without notice.
Display of
Gas concentration
MGC2-12
Printed in USA 131119
Advertisement
Table of Contents
