Intec MGC2-12 User Manual page 26

PolyGard Multi-Point Controller
®
User Manual - MGC2-12
Binary - Relay Outputs "R01 to R15"
Stage-level control & alarming
Stage-level control & alarming
Stage-level control & alarming
*** Factory pre-configured horn and fault (fail-safe),
can be reassigned/converted for remote control,
stage-level #14 and/or #15
Polygard® is a registered trademark of MSR
Customer Services (858) 578-7887 & (888) GO INTEC
INTEC Controls, 12700 Stowe Dr., Suite 100, Poway, CA 92064
#5
#4
#3
#2
#1
= Relay status LEDs D1 to D5 located below terminal connection of sensor inputs (X10)
#10
#9
#8
#7
#6
"EP-02-1"
= Relay status LEDs D1 to D5 located below terminal connection of sensor inputs (X10)
(–)
Built-in horn alarming***
(+)
factory wired, 24 VDC
Fault (fail) alarming
***
#13
#12
#11
"EP-02-2"
= Relay status LEDs D1 to D5 located below terminal connection of sensor inputs (X10)
Fax (858) 578-4633 & (888) FX INTEC
(Located at Controller module, EP-02-1
1 2 3 4 5 6 7 8 9 10
R01 R02 R03
Normal condition (factory default)
D1 D2 D3
1 2 3 4 5 6 7 8 9 10
R06 R07 R08
Normal condition (factory default)
D1 D2 D3
1 2 3 4 5 6 7 8 9 10
R11 R12 R13
Normal condition (factory default)
D1 D2 D3
Specification subject to change without notice.
www.inteccontrols.com
Page 26
& EP-02-2 modules)
11 12 13 14 15 X2
R04 R05
D4 D5
11 12 13 14 15 X2
R09 R10
D4 D5
1H1
11 12 13 14 15 X2
R14 R15
D4 D5
Printed in USA 131119
MGC2-12