Installing The G8264 In A Lenovo Idataplex Rack - Lenovo RackSwitch G8264 Installation Manual

Installing the G8264 in a Lenovo iDataPlex Rack

Statement 26
44
G8264 Installation Guide
This section describes how to install the G8264 in a Lenovo iDataPlex rack. The
iDataPlex mounting kit allows the switch to be mounted either horizontally or
vertically.
The kit must be purchased separately. It includes the following parts:
Table 12.
Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
1 Switch front brackets
2 M4 screws
3 M6 screws
4 M6 clip nuts
5 M6 locking washers
6 Switch rear brackets
7 Rear alignment plates
Attention: The rack-mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2-post application). If
the switch has an undesirable amount of sag, it is recommended to use a 4-post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4-post rack.
CAUTION:
Do not place any object on top of rack‐mounted devices.
Quantity
2
16
8
8
8
2
2