Installing the NE2572O in a Lenovo iDataPlex Rack
This section describes how to install the NE2572O in a Lenovo iDataPlex rack. The
iDataPlex mounting kit allows the switch to be mounted either horizontally or
vertically.
The kit must be purchased separately. It includes the following parts:
Table 8.
Item number
1
2
3
4
5
6
Attention: The rack‐mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2‐post application).
If the switch has an undesirable amount of sag, it is recommended to use a 4‐post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4‐post rack.
Statement 26
CAUTION:
Do not place any object on top of rack‐mounted devices.
40
NE2572O Installation Guide
All manuals and user guides at all-guides.com
Lenovo Adjustable 19" 4-Post Rail Kit parts
Description
Switch front brackets
M4 screws
M6 screws
M6 clip nuts
Switch rear brackets
Rear alignment plates
Quantity
2
16
8
8
2
2