Lenovo RackSwitch G8264 Installation Manual page 46

5.Secure the switch to the front rack posts with M6 screws (Item 3), washers (Item 5), and clip nuts (Item
4). Torque the screws to approximately 5.7 Nm +/‐ 0.1 Nm (50 inch‐pounds).
6.Attach the rear alignment plate (Item 7) to the rear rack posts with M6 screws (Item 3), washers (Item
5), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/‐ 0.1 Nm (50 inch‐pounds).
7.If installing the 1U air‐duct option, see the instruction on page
8.Connect all external cables in accordance with the "Cabling Guidelines" on page
9.Initialize the switch. See Chapter 5, "Initializing the G8264," on page
10.If the switch is a replacement unit, set Vital Product Data (see "Configuring Vital Product Data" on
page 72).
46
G8264 Installation Guide
4
5
3
4
5
3
7
47.
36.
75.