Installing The G8264Cs In A Lenovo Idataplex Rack - Lenovo RackSwitch G8264CS Installation Manual

Installing the G8264CS in a Lenovo iDataPlex Rack

© Copyright Lenovo 2015
This section describes how to install the G8264CS in a Lenovo iDataPlex rack. The
iDataPlex mounting kit allows the switch to be mounted either horizontally or
vertically.
The kit must be purchased separately. It includes the following parts:
Table 13. Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
Switch front brackets
1
M4 screws
2
M6 screws
3
M6 clip nuts
4
M6 locking washers
5
Switch rear brackets
6
Rear alignment plates
7
Attention: The rack-mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2-post application). If
the switch has an undesirable amount of sag, it is recommended to use a 4-post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4-post rack.
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
Chapter 3: Installing G8264CS Hardware and Options
Quantity
2
16
8
8
8
2
2
45