Removing The G8264 From A Lenovo System X Or Power Rack - Lenovo RackSwitch G8264 Installation Manual

Removing the G8264 from a Lenovo System x or Power Rack

1.Disconnect all external cables.
2.If the air‐duct option has been installed, remove it as described in "Removing the Air‐Duct Option" on
page 71.
3.Loosen and remove M3.5 screws that secure the rear brackets to the front brackets.
4.Loosen and remove the M6 screws, washers, and clip nuts (or cage nuts) that attach the filler plate and
rear mounting brackets to the rear rack posts.
© Copyright Lenovo 2017
This section describes how to remove the G8264 from a Lenovo System x or Power
4‐post rack.
To remove the G8264 from a System x or Power rack, complete the following steps:
6
7 8
9
3
10
Chapter 4: Removing and Replacing G8264 Components
1
5
67