Switch Port Commands - ATEN VM0808HA User Manual

Switch Port Commands

The formula for Switch Port commands is as follows:
Switch Command + Input Command + Port number + Output
Command + Port Number + Control + [Enter]
1. For example, to switch input port 02 to output port 05, type the following:
sw i02 o05 [Enter]
2. To turn off output on port 03, type the following:
sw o03 off [Enter]
3. To switch output port 04 to the next port, type the following:
sw o04 + [Enter]
The following table shows the possible values for switch commands:
Input Command
Input Port Number
Output Command
Output Port Number
Command
sw Switch command
i Input command
xx 01-08 port (default is 01)
o Output Command
yy 01-08 port (default is 01)
* All output ports
Control
on Turn on
off Turn off
+ Next port
- Previous port
Enter
[Enter] Enter and send out the
command
Chapter 5. RS-232 Commands
Description
Description
Description
Description
Description
Description
Description
71