Switch Port Command - ATEN VM51616H User Manual

Switch Port Command

The Switch Port command allows you to switch ports on the VM51616H.
The formula for the Switch command is as follows:
Command + Input + Number + Output + Number + Group + Control
+ [Enter]
1. For example, to switch input port 02 to output port 05, type:
sw i02 o05 [Enter]
2. To switch output port 04 to the next port, type:
sw o04 [Enter]
3. To turn off video output on port 03, type:
sw o03 off [Enter]
4. To switch audio from input port 06 to stereo audio output, type:
sw i06 console audio [Enter]
The following tables show the possible values for the Switch Port command:
Command
Input Command
Port number
Output Command
Port number
Group
normal
console audio
sw Switch command
i Input command
xx 01-16 port
o Output command
yy 01-16 port
* All output ports
default HDMI audio outputs
Switch the audio to the stereo audio
output
Chapter 5. RS-232 Commands
Description
Description
Description
Description
Description
Description
87