Switch Port Command - ATEN VM6404H User Manual

VM6404H User Manual

Switch Port Command

The Switch Port command allows you to switch ports on the VM6404H.
The formula for the Switch command is as follows:
Command + Input + Number + Output + Number + Control + [Enter]
1. For example, to switch input port 02 to output port 04, type:
sw i02 o04 [Enter]
2. To switch output port 04 to the next port, type:
sw o04 + [Enter]
3. To turn off video output on port 03, type:
sw o03 off [Enter]
The following tables show the possible values for the Switch Port command:
Command
Input Command
Port number
Output Command
Port number
Control
Note: 1. By default, input port 01 is tied to output port 01; input port 02 is tied
to output port 02; and so on until port 04 (i.e., o01 i01, o02 i02).
2. Each command string can be separated with a space.
76
sw Switch command
i Input command
xx 01-04 port
o Output command
yy 01-04 port
* All output ports
on Turn on the display
off Turn off the display
+ Next Port
- Previous Port
Description
Description
Description
Description
Description
Description