Table of Contents
Advertisement
WPS-365-DVR-9CH & 16CH Installation and Users Manual
6.9. SYSTEM SETUP
The System Setup allows the administrator to set the system time, time zone, time synchronization,
language, etc.
In the Setup Menu display, press ▲▼◄► on the front panel of the DVR or on the remote to change the
highlighted option to System, and then press ENTER to display System Setup as shown.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the "X." If
the contents in this menu have been modified, a Save dialog box will be displayed requesting the user
to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and save, ESC
to exit without saving. Another method to escape is to use the mouse to "right-click" and exit the
sub menu.
The following is a brief description for each item in this menu and its specific operations:
• TIME ZONE
Press the +/- buttons on the front panel of the DVR or on the remote control to select the appropriate
time zone. Alternatively use the mouse to select the time zone. The default setting is Eastern Standard
Time.
• DAYLIGHT SAVING TIME
Press ENTER or +/- on the front panel of the DVR or on the remote control to enable or disable this item.
Alternatively use the mouse to enable or disable this feature.
• SYSTEM TIME
- Synchronization
Press ENTER or +/- buttons on the front panel of the DVR or on the remote control to enable or disable
time synchronized with a TSP Server. Alternatively use the mouse to enable or disable this feature.
The default setting is enabled.
- TSP Server
If Time Synchronization is enabled, select a TSP (Time Synchronization Protocol) Server. The DVR will
synchronize with the specified TSP server at the system preset interval. Please follow the Text Input
method described in Section 4.1 to modify this setting. Alternatively use the mouse and the pop-up
keyboard to enter the TSP server.
- Date
System Date. Press +/- buttons on the front panel of the DVR or on the remote control to modify the
date. Alternatively use the mouse to set the date.
- Time
System Time. Press +/- buttons on the front panel of the DVR or on the remote control to modify the
time. Alternatively use the mouse to set the date.
53
Advertisement
Table of Contents
