Table of Contents
Advertisement
WPS-365-DVR-9CH & 16CH Installation and Users Manual
3. INSTALLATION
3.1. POSITIONING THE 365 DVR
Wirepath Surveillance DVRs are designed to deliver unsurpassed technology with superior performance.
However, where you place the DVR can have a large effect on the performance that you receive, and
the life of the unit. Here are some guidelines to follow when installing the DVR.
• If you are not rack-mounting the DVR, position it with all feet resting on a solid level surface.
• Be sure that the DVR is in a well-ventilated area that provides adequate cooling.
- Do not block the cooling fan located on the rear
panel. Proper ventilation is important to the
performance and life span of the power supply
and HDD(s).
- Do not place the DVR on carpeting or any
similar material.
- Do not install the DV R near a source of heat,
or in an extremely humid or wet location.
- If your installation lacks good air flow (such as
solid cabinet doors or wall-mounted racks), it
may be necessary to create ventilation to allow
outside air into the space.
• Allow a minimum of 2" of depth behind unit to accommodate cables and connectors.
3.1.1.
RACK MOUNTING THE 365 SERIES DVR
The 365 series DVR can be conveniently mounted within a rack with the supplied rack ears.
Before mounting the rack ears must be installed on the DVR.
1. Carefully remove the 2 screws on either side of the DVR near the front panel.
2. Gently place the rack ears on the DVR and secure with the removed in Step 1.
3. Remove the feet from the bottom of the DVR.
4. The DVR is now ready to be placed into a rack with the rest of the system components.
11
G
G
G
G
ALARM
RS-485
VGA
HDMI
OUT
C
G
+
-
Rack Ear Screws
Cooling Fan
DO NOT BLOCK
ESATA
POWER
DC 12V
Advertisement
Table of Contents
