Table of Contents
Advertisement
WPS-365-DVR-9CH & 16CH Installation and Users Manual
5.7. SYSTEM SHUTDOWN
This menu is available to Administrators only.
Always properly shutdown the DVR before moving it. The hard drive can be damaged if the DVR is moved
before shutdown. The DVR will reboot to whatever state it was in when it was properly shut down (ex: split
window display, etc).
WARNING – When powering off the DVR, the following shutdown procedure must
!
be used. Turning the DVR off or removing power without following this procedure
may cause damage to the hard disk drives.
1. Access the menu by pressing the MENU/ESC button on the front panel or IR remote. Alternatively the
mouse can be used by right clicking to open the menu.
2. Login to the DVR and continue with the following steps.
3. Using the ▲▼◄► buttons, navigate to Shutdown . Press ENTER to select. Alternatively the mouse can be
used to select the icon. Once selected a scrolling message will appear at the bottom of screen indicating
that shutdown is in process.
4. Once the message "Shutdown completed. You may turn off the system now." appears, it is safe to turn the
DVR off using the power switch on the back of the DVR.
5. The DVR is now shutdown and safe to move or service.
26
Advertisement
Table of Contents
