Rs-232/485 - Wirepath WPS-365-DVR Installation And User Manual

WPS-365-DVR-9CH & 16CH Installation and Users Manual
e-mail feature will not be operable. Do not enter generic text in this field.
• MAIL TO #1-5
The DVR can send e-mails originated from triggered events to up to five different e-mail addresses.
Enter the appropriate e-mail addresses in these fields.
• ATTACHMENT
This feature offers the ability to attach a picture from the corresponding camera to the e-mail being
sent. Optional picture sizes for the attachment can be set to Original to match the recorded resolution
or set to QCIF (Quarter CIF is 176 x 144 pixels) to reduce the size of the attachment. Select N/A to disable
attachments.
NOTE: If the DVR's resolution is set to Half D1, picture attachments in the e-mail will appear "squished"
since the DVR reduces the horizontal lines of resolution by half (therefore reducing storage space and
bandwidth requirements). This only effects e-mails and not noticeable in .h.264 live or recorded
playback video.
• PUSH ALARM
This feature has no function for this model of DVR

9.3.14. RS-232/485

The RS-232/485 Setup allows the administrator to setup the RS-232 DSUB connection for control via an
Automation System, and the RS-485 screw terminal connections for PTZ Camera operation. Please refer to the
manuals for the connected devices (typically PTZ cameras) to properly set the options in RS-232/485 Setup.
In the Setup menu display, press ▲▼◄► on the front panel of the DVR or on the remote to change the
highlighted option to RS-232/422/485, and then press enter to display RS-232/422/485 Setup as shown.
A list of available commands and syntax can be found in the RS-232 Protocol document located in the support
tab on the product page.
RS-232/OPTIONAL RS-232
The following is a brief description for each item in the RS-232 MENU and its specific operations:
NOTE: Only the Baud Rate should be configured for RS-232. All other settings should be set to the recommended
settings below.
107