Table of Contents
Advertisement
WPS-365-DVR-9CH & 16CH Installation and Users Manual
5.5. BACKUP DEVICE
The Backup Device menu allows for backup and recovery of the DVR's configuration to or from a USB device.
This DVR supports a variety of USB 2.0 storage devices including thumb drives and DVD drives.
Once in the main Menu display, press ▲▼◄► on the front panel of the DVR or remote control to select
Backup Device, and then press ENTER to display the menu as shown. Alternatively use the mouse to click
on the Backup Device icon.
Note: It is highly recommended to make a backup of the configuration once complete. Keep a copy of
this backup in a secure location for future use. When setting up multiple DVRs with similar configurations,
this feature could also be used to create a "template" file to speed the setup process.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item. Alternatively
use the mouse to select an item.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main Menu display. Alternatively use the mouse to exit the sub menu by clicking on the
"X." If the contents in this menu have been modified, a Save dialog box will be displayed requesting
the user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit
and save, ESC to exit without saving. Another method to escape is to use the mouse to "right-click,"
and exit the sub menu.
• CONNECT/DISCONNECT
If the backup device is disconnected (as shown in screen capture above), plug the USB device into the
USB 2.0 port and then press ENTER on the front panel of the DVR or on the remote control. Alternatively
use the mouse to click on the CONNECT button. If the device is already plugged in, press ENTER on the
front panel of the DVR or on the remote control to connect the device. Alternatively use the mouse
to click on CONNECT. It is recommended to select the DISCONNECT option before unplugging the
USB device.
Note 1: Before using a USB drive, please format it to FAT32 file system using Windows.
Note 2: The backup device must be connected by the system software before it can be used to read/
write. If it fails to connect, unplug the device and then plug the device into the USB port again.
Note 3: Some backup devices may have compatibility problems.
• BACKUP
Once a device is connected, use the ▲▼◄► buttons on the front panel of the DVR or the remote control
to select BACKUP for the corresponding USB device and press ENTER. Alternatively use the mouse to select
this button. Enter the directory to backup the configurations to. This button will remain white in color and
unavailable until a USB device is connected.
• RESTORE
Once a device is connected, use the ▲▼◄► buttons on the front panel of the DVR or the remote control
to select RESTORE for the corresponding USB device and press ENTER. Alternatively use the mouse to select
this button. Enter the directory to restore the configurations from. This button will remain white in color and
unavailable until a USB device is connected.
24
Advertisement
Table of Contents
