Table of Contents
Advertisement
WPS-365-DVR-9CH & 16CH Installation and Users Manual
9.3.11. SCHEDULE
The Scheduled Record Setup allows the administrator to define when and how video (and audio) will be
recorded. This feature may be useful to increase hard drive storage space by defining what types of events
are recorded on specific days of the week. For example if Normal Recording (recall that the DVR is capable
of always recording video even without event triggers such as motion or alarm) is not necessary, this feature
can be disabled on a daily basis. To further define when and how the DVR records, up to 16 time segments
(Conditional 1 – Conditional 16) are available for each day of the week.
The following is a brief description for each item in this menu and its specific operations:
• MODE
Allows choice of scheduling for all cameras simultaneously, or scheduling by individual camera number.
• CAMERA ID
Determine which camera's schedule is being configured when using the Individual mode.
• TIME
Set the start time of this time segment (conditional) in increments of 30 minutes in military time format. The
end time of this conditional is implicitly set as the start time of next conditional.
Example: If the following start times are set:
•
Conditional 1 = MON at 9:00
•
Conditional 2 = MON at 18:00
•
Conditional 3 - Conditional 16 = MON as N/A (Not Available)
--- then ---
•
Conditional 1 = MON 9:00-18:00
Conditional 2 = MON 0:00-9:00 and 18:00-24:00
•
• ALARM
Define if Alarm events are recorded. Options include V for Video only, AV for Audio and Video, NO for No
Recording (provides event notifications without event recording), and OFF to turn all event notifications and
recordings off.
• MOTION
Define if Motion events are recorded. Options include V for Video only, AV for Audio and Video, NO for No
Recording (provides event notifications without event recording), and OFF to turn all event notifications and
recordings off.
104
Advertisement
Table of Contents
