Specifications; Wireless Specifications; Measurement Specifications; Power Consumption - Ambient Weather WS-0800-IP ObserverBase User Manual

Term
Hygrometer
Inches of Mercury (inHg)
Range
Relative Barometric
Pressure
Resolution
Thermometer

6. Specifications

6.1 Wireless Specifications


Line of sight wireless transmission (in open air): 300 feet, 100 feet under most conditions

Update Rate: about one minute

Frequency: 915 MHz

6.2 Measurement Specifications

The following table provides the specifications for the measured parameters.
Measurement
Indoor Temperature
Outdoor Temperature
Indoor Humidity
Outdoor Humidity
Barometric Pressure

6.3 Power Consumption


ObserverIP Receiver : 5V DC Adaptor (included)

Indoor Thermo-hygrometer-barometer sensor : 2xAA batteries (not included)

Outdoor Thermo-hygrometer sensor: 2xAA batteries (not included)
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved.
as millibars (1 hPa = 1 mbar)
A hygrometer is a device that measures relative humidity. Relative
humidity is a term used to describe the amount or percentage of water
vapor that exists in air.
Pressure in Imperial units of measure.
1 inch of mercury = 33.86 millibars
Range is defined as the amount or extent a value can be measured.
Measured barometric pressure relative to your location or ambient
conditions.
Resolution is defined as the number of significant digits (decimal
places) to which a value is being reliably measured.
A thermometer is a device that measures temperature. Most digital
thermometers are resistive thermal devices (RTD). RTDs predict change
in temperature as a function of electrical resistance.
Range
32 to 140 °F
-40 to 149 °F Lithium
batteries
-23 to 140 °F Alkaline
batteries
1 to 99%
1 to 99%
8.85 to 32.50 inHg
Definition
Accuracy
± 2 °F
± 2 °F
± 5%
± 5%
± 0.08 inHg (within range of
27.13 to 32.50 inHg)
Resolution
0.1 °F
0.1 °F
1 %
1 %
0.01 inHg
Page 24