Quick Start Guide; Getting Started; Parts List - Ambient Weather WS-0800-IP ObserverBase User Manual

Finder Tools, visit:

2. Quick Start Guide

Although the manual is comprehensive, much of the information contained may be intuitive. In
addition, the manual does not flow properly because the sections are organized by components.
The following Quick Start Guide provides only the necessary steps to install, operate the weather
station, and upload to the internet, along with references to the pertinent sections.
Step
1 Power up the outdoor thermo-hygrometer sensor
2 Power up the indoor thermometer-hygrometer-barometer sensor
3 Power up the ObserverIP, connect to your router and synchronize with the
indoor and outdoor sensors
4 Calibrate the relative pressure to sea-level conditions (local airport) on the
ObserverIP module
5 Register and upload to Weather Server

3. Getting Started

The WS-1000-WiFi weather station consists of a ObserverIP receiver, an outdoor thermos-hygrometer
sensor, and wireless thermo-hygrometer-barometer.

3.1 Parts List

QTY
1 ObserverIP Receiver
Dimensions (LxWxH): 3x2x1"
1 Indoor thermo-hygrometer-barometer
transmitter (WH32B)
Dimensions (LxWxH): 4.8" x 1.6" x 0.7"
(122 x 42 x 18 mm)
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved.
http://www.ambientweather.com/observerip.html
Required
Description
Item
Section
3.3
3.4
3.6
3.9.6
3.8
Image
Page 2