Liability Disclaimer - Ambient Weather WS-0800-IP ObserverBase User Manual

module does not
communicate to the
server.

8. Liability Disclaimer

Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the "User manual" is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
This product is designed for use in the home only as indication of weather conditions. This product is
not to be used for medical purposes or for public safety information.
The specifications of this product may change without prior notice.
Version 1.0 ©Copyright 2015, Ambient LLC. All Rights Reserved.
http://www.AmbientWeather.com/observerip.html
2. Power down the ObserverIP module but leave connected to your
router.
3. Launch the IP Tools application as referenced in Section 3.7. Since
the module is powered down, you will not be able to locate it on
your network, but proceed anyway.
4. Select the Upgrade button.
5. Reference Figure 27. Select the Select File button, and browse to
the location of the file you downloaded in Step 1.
6. Select the Upgrade Firmware button.
7. Plug in the ObserverIP module. The software will locate the device
on your network and begin the update.
Reference Figure 28. The dialog box will display Received a
Read Request from the ObserverIP module. A green progress bar
will provide you with the upgrade status.
DO NOT OPERATE THE MOUSE OR KEYBOARD WHEN
UPGRADING to prevent interruption of the upgrade.
8. Once the firmware upgrade is complete, the dialog box will display
Read session is completed successfully, as shown in Figure 29.
9. Wait about one minute for the ObserverIP module to reboot. You
can now Exit the upgrade window, and access the module again, as
referenced in Section 3.7.
All of the lights should be on except the Server light (you will need
to reprogram the Wunderground.com settings).
Page 26