Table of Contents
Advertisement
3. Select More | Register Your PWS.
4. Click Send Validation Email. Respond to the validation email from Wunderground (it may
take a few minutes).
5. Select More | Register Your PWS again and enter all of the information requested.
6. Once registered, you receive a station ID and password. Make a note of this. You will need to
enter it into your weather station (Figure 19 is an example, and your station ID and password
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Figure 16
Figure 17
Figure 18
Page 13
Advertisement
Table of Contents
Need help?
Do you have a question about the WS-0800-IP ObserverBase and is the answer not in the manual?