Changing The Headlight Bulb; Changing The Turn Signal Bulb - KTM 690 Enduro R EU 2012 Repair Manual

16 LIGHTING SYSTEM, INSTRUMENTS
16.7

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
16.8

Changing the turn signal bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Pull bulb socket
–
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
600612-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Pull off connector
–
Take off protection cap
600610-10
–
Detach spring bar
–
Remove headlight bulb
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) (
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Attach the connector.
600611-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
out of the reflector.
2
out of the bulb socket.
3
p. 100)
.
1
of the headlight bulb.
2
.
3
.
4
p. 181)
p. 100)
p. 181)
p. 101)
p. 100)
p. 101)
102