KTM 690 Enduro R EU 2012 Repair Manual page 109

17 ENGINE
Main work
–
Position the engine in the frame.
202081-10
–
Mount swingarm pivot
–
Mount the screw of the swingarm pivot but do not tighten yet.
–
Mount screw connection
202080-11
–
Remove the floor jack with the special tool.
Floor jack attachment (75029055000) (
202079-10
–
Position the engine bearer.
–
Mount and tighten screws
Guideline
Screw, engine bearer on frame
–
Mount and tighten screw
Guideline
Engine carrying screw
202077-11
–
Tighten the swingarm pivot.
Guideline
Screw, swingarm pivot
–
Tighten the lower engine bracket.
Guideline
Engine carrying screw
–
Position the line with the oil pressure sensor. Mount and tighten connection
Guideline
Oil pressure sensor line
–
Position the clamp of the oil line. Mount and tighten screw
tor.
Guideline
Remaining screws, chassis
202078-11
.
1
of the lower engine attachment but do not tighten yet.
2
p. 221)
.
3
M10
with nut.
4
M10 45 Nm
(33.2 lbf ft)
M12
M10 45 Nm
(33.2 lbf ft)
M10x1
M6
107
45 Nm
(33.2 lbf ft)
Loctite ® 243™
80 Nm (59 lbf ft)
Loctite ® 243™
.
5
10 Nm (7.4 lbf ft)
. Plug in the connec-
6
10 Nm (7.4 lbf ft)