Cleaning The Oil Screens - KTM 690 Enduro R EU 2012 Repair Manual

20 LUBRICATION SYSTEM
20.8

Cleaning the oil screens

Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
–
Place a suitable container under the engine.
Main work
–
Remove plug
100205-10
–
Remove plug
–
Completely drain the remaining engine oil.
–
Thoroughly clean the parts and sealing area.
100206-10
–
Position oil screen
–
Mount and tighten screw plug
Guideline
Plug, oil screen
100207-10
–
Position oil screen
–
Mount and tighten screw plug
Guideline
Plug, oil screen
100208-10
with oil screen and the O-rings.
1 2
with oil screen and the O-rings.
3 4
with the O-rings.
2
with the O-ring.
1
with the O-rings.
4
with the O-ring.
3
M20x1.5 15 Nm
(11.1 lbf ft)
M20x1.5 15 Nm
(11.1 lbf ft)
173