Changing The Main Fuse; Changing Fuses Of Individual Power Consumers - KTM 690 Enduro R EU 2012 Repair Manual

14 WIRING HARNESS, BATTERY
14.7

Changing the main fuse

Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers in the vehicle. It is in the housing of the starter relay next to the battery.
14.8

Changing fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Remove protection covers
601791-10
–
Remove a defective main fuse
–
Install a new main fuse.
Fuse (58011109130) (
Info
A reserve fuse
–
Check the functioning of the electrical equipment.
–
Mount the protection covers.
601792-10
Finishing work
–
Mount the seat. (
–
Set the clock. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Open fuse box cover
601791-11
p. 62)
.
1
with needle nose pliers.
2
p. 181)
is located in the starter relay.
3
p. 63)
p. 98)
p. 62)
.
1
85