Filling Up With Engine Oil; Adding Engine Oil - KTM 690 Enduro R EU 2012 Repair Manual

20 LUBRICATION SYSTEM
20.9

Filling up with engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
20.10

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
Main work
–
Remove filler plug with O-ring
Engine oil
–
Refit plug with O-ring
100209-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Install the engine guard. (
–
Check the engine oil level. (
Main work
–
Remove the oil filler plug
engine oil.
Engine oil (SAE 10W/60) (00062010035) (
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
100209-10
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Check the engine oil level. (
from the clutch cover and add engine oil.
1
1.70 l (1.8 qt.)
and tighten it.
1
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 36)
p. 169)
with the O-ring from the clutch cover and fill up with
1
p. 210)
1
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 169)
Engine oil (SAE 10W/60)
(00062010035) ( p. 210)
Alternative engine Engine oil
oil (SAE 10W/50)
(
p. 210)
with the O-ring.
174
p. 210)