Offset Function - SMC Networks HRS090-A...-20 Series Original Instructions Manual

HRX-OM- T002
Chapter 5 Display and setting of various functions

5.9 Offset function

5.9.1

Offset function

Offset function
MODE1
MODE2
MODE3
(Default)
5.9 Offset function
5-22
This is a function that controls the "circulating fluid display temperature" and
the "target temperature for chiller temperature control" by shifting the
temperature for the set offset value.
This product has three different modes of offset functions (MODE 1 to 3).
(The default setting of this function is "OFF".)
See "Table 5.9-1 Offset function" shown below for these modes.
Refer to "5.9.2 Usage example of offset function" for operation methods.
Refer to "5.9.3 Setting/checking of offset function" for the setting
instructions.
[When communication is being used]
The circulating fluid temperature sent by serial communication is the
circulating fluid temperature (the circulating fluid temperature after offset)
which is displayed on the thermo-chiller.
Table 5.9-1 Offset function
Circulating fluid display
Displays the "circulating fluid
discharge temperature".
Displays the temperature that is
"circulating
temperature
temperature".
Displays the temperature that is
"circulating
temperature
temperature".
OFF
Displays the "circulating fluid
discharge temperature".
temperature
fluid discharge
plus offset
fluid discharge
minus offset
Temperature control
Circulating fluid temperature is
controlled to be
circulating fluid temperature plus
offset temperature".
Circulating fluid temperature is
controlled to be
circulating fluid temperature".
Circulating fluid temperature is
controlled to be
circulating fluid temperature plus
offset temperature".
Circulating fluid temperature is
controlled to be
circulating fluid temperature".
HRS090 Series
"the set
"the set
"the set
"the set