Offset (Temp Offset) Function - SMC Networks HRS Series Operation Manual

・Offset (TEMP OFFSET) function
3.
The circulating fluid temperature can be offset. Refer to "■ About offset function" (P.5-33)
for details.
This function can be set on "Offset setting" screen.
Refer to Table 5.4-6 Offset setting for details.
(1)
(2)
No. Indication
(1) Offset Temp.
(2) Offset Mode
■ About o ffset function
This function controls the circulating fluid discharge temperature with offset.
Temperature offset may occur between the thermo-chiller and the customer's device
depending on the installation environment. To correct the temperature offset, three types of
offset functions are available (MODE1 to 3). The default setting of this function is "OFF".
【When communication is used】
The circulating fluid temperature sent by serial communication is the circulating fluid
temperature which is displayed on the thermo-chiller (the circulating fluid temperature after
offset).
HRS Series
Offset setting
Table 5.4-6 Offset setting
Item
Offset
Sets offset temperature.
temperature
Selects the offset mode.
[
[
Offset mode
[
[
Chapter 5 Display and Setting of Various Functions
Explanation
]
Disabled
]
MODE 1
]
MODE 2
]
MODE 3
DOC1001322
Setting range
-20.0 ºC to +20.0 ºC
[By default] 0.0 ºC
OFF / 1 / 2 / 3
[By default] OFF
5.4 Description of the Screen
5-33