Installation; Environment - SMC Networks HRS090-A...-20 Series Original Instructions Manual

HRX-OM- T002
Chapter 3 Transport and Setting Up

3.2 Installation

Do not set up the product in places possibly exposed to leakage of
flammable gas. Should any flammable gas stay around the product,
the product may cause a fire.
 Keep the product uplight on a rigid and flat floor which can resist
 Keep the ambient temperature of the product between 5 to 45
 The installer/end user is responsible for carrying
3.2.1

Environment

3.2 Installation
3-4
the weight of the product, and take measures to prevent the
product from tipping over. Improper installation may cause water
leakage, tipping, damage of the product or injure the operator.
Operation out of this ambient temperature range may cause a
malfunction of the product. Operating the product in an
environment temperature of 45
discharging efficiency of the heat exchanger and the safety device
may function, resulting in the product operation stoppage.
out a acoustic noise risk assessment on the equipment after
installation and taking appropriate measures as required.
The product must not be operated, installed, stored or transported in the
following conditions. Potential malfunction or damage to the product may
occur if these instructions are disregarded.
The product is not designed for clean room. The pump and ventilating fan
inside the product generate particles.
 Outdoors
 Location that is exposed to steam, salt water or oil.
 Location that is exposed to dust or powder material.
 Location that is exposed to corrosive gas, organic solvent, chemical
solution, or flammable gas (the product is not explosion-proof)
 Location where the ambient temperature is out of the following range:
During transportation or storage: 0 to 50°C (No water or circulating fluid in
the piping.)
During operation: 5 to 45°C
 Location where condensation forms on the inside electrical parts.
 Location that is exposed to direct sunlight or heat radiation.
 Location that is near heat sources and poor in ventilation.
 Location that is subjected to abrupt changes in temperature.
 Location that is subjected to strong electromagnetic noise (intense electric
field, intense magnetic field, or surges).
o
C may reduce the heat
o
C.
HRS090 Series