Xerox WorkCentre 3655 Secure Installation And Operation page 3

I. Secure Installation and Set-up in the Evaluated Configuration
To set up the machines in the evaluated configuration, follow the guidelines below:
a. Make sure that the following system software releases along with patch 905956v2

WorkCentre 3655/3655i: 073.060.075.34540

WorkCentre 5845/5855/5865/5865i/5875/5875i/5890/5890i: 073.190.075.34540

WorkCentre 5945/5945i//5955/5955i: 073.091.075.34540

WorkCentre 6655/6655i: 073.110.075.34540

WorkCentre 7220/7220i/7225/7225i: 073.030.075.34540

WorkCentre 7830/7830i/7835/7835i: 073.010.075.34540

WorkCentre 7845/7845i/7855/7855i: 073.040.075.34540

WorkCentre 7970/7970i: 073.200.075.34540
b. Set up and configure the following security protocols and functions in the evaluated configuration:

Immediate Image Overwrite

On Demand Image Overwrite

Data Encryption

FIPS 140-2 Mode

IP Filtering

Audit Log

Security Certificates, Transport Layer Security (TLS)/Secure Sockets Layer (SSL) and HTTPS

IPSec

Local, Remote or Smart Card Authentication

Local or Remote Authorization

User Permissions

Personalization

802.1x Device Authentication

Session Inactivity Timeout

USB Port Security

SFTP Filing

Embedded Fax Secure Receive

Secure Print

Hold All Jobs

®
McAfee Embedded Control

Erase Customer Data
System Administrator login is required when accessing the security features via the Web User Interface (Web UI)
or when implementing the guidelines and recommendations specified in this document. To log in to the Web UI as
an authenticated System Administrator, follow the instructions under "Accessing CentreWare Information Services
as a System Administrator" under "Accessing Administration and Configuration Settings" in Section 2 of the
applicable System Administration Guide (SAG)
To log in to the Local User Interface (denoted hereafter in this document as the Control Panel) as an authenticated
System Administrator, follow "Accessing the Control Panel as a System Administrator" under "Accessing
Administration and Configuration Settings" in Section 2 of the SAG.
4 Links to each of the system software mentioned above, along with the applicable installation instructions, can be found at
http://www.support.xerox.com/support/enus.html
and then selecting the 'Drivers & Downloads' link;
http://www.support.xerox.com/support/CK_PROD_DOWN/file-download/enus.html?contentId=134478
.
5 Xerox ® WorkCentre ® 3655/3655i Multifunction Printer 2016 Xerox
February 2016; Xerox ® WorkCentre
Version 1.3, February 2016; Xerox
Administrator Guide, Version 1.3, February 2016; Xerox
System Administrator Guide, Version 1.3, February 2016; Xerox
ConnectKey ® Technology System Administrator Guide, Version 1.3, February 2016; Xerox
2016 Xerox ® ConnectKey ® Technology System Administrator Guide, Version 1.3, February 2016; Xerox
Multifunction Printer 2016 Xerox
by searching for the products listed above with the 'I' designation (e.g., WorkCentre 3655i)
the link to the 905956v2 patch can be found at
® 5800/5800i Multifunction Printer 2016 Xerox
WorkCentre 5945/5945i/5955/5955i Multifunction Printer 2016 Xerox
® ®
® WorkCentre
® ConnectKey ® Technology System Administrator Guide, Version 1.3, February 2016.
5
.
® ConnectKey ® Technology System Administrator Guide, Version 1.3,
® ConnectKey
® 6655/6655i Multifunction Printer 2016 Xerox
WorkCentre 7220/7220i/7225/7225i Multifunction Printer 2016 Xerox
® ®
®
2
4
are installed on the device:
® Technology System Administrator Guide,
ConnectKey
®
® ConnectKey
WorkCentre ® 7800/7800i Multifunction Printer
® WorkCentre ® 7970/7970i
Technology System
®
® Technology
®